SSH certificate login advanced example: Run an SSH CA and connect to hosts using SSH certificates
OpenSSH and SSHD have supported SSH certificate login for almost ten years. In this tutorial, you'll learn how to use SSH certificates (for hosts & users) generated by open source
step-ca using the
step ssh sub-command.
- Learn how to configure OpenSSH and SSHD for certificate authentication using
- Examples include copy/paste code blocks and pre-generated PKI.
- When complete, you will be able to use OpenSSH and SSHD for SSH certificate login with a private SSH certificate authority.
- Estimated effort: Reading time ~10 mins, Lab time ~60 to 180 mins.
- Open Source - This tutorial assumes you have initialized and started up a
step-cainstance using the steps in Getting Started.
- Smallstep Certificate Manager - Please contact Smallstep Customer Success if you would like to activate SSH certificates on your Certificate Manager account.
- Setup VM
- Configure ssh client to accept host certs
- Configure sshd to accept user certs
- Login to VM via SSH user cert
- Generate ssh host certificates
- Generate your own PKI for step-ca
You can find all of the code in the example below here: https://github.com/smallstep/step-ssh-example
The code in this repo comes with a pre-generated PKI. You will need
step v0.13.3+ and Vagrant, plus a provider like VirtualBox installed locally.
You're going to run a CA in your local environment and we'll use SSH to connect
to a Vagrant VM (representing a remote host) that has
sshd pre-configured to
accept SSH user certificates signed by our CA.
With Vagrant installed, run the following commands inside the repo:
$ vagrant up Bringing machine 'testhost' up with 'virtualbox' provider... ==> testhost: Importing base box 'ubuntu/bionic64'... [...] ==> testhost: Preparing network interfaces based on configuration... testhost: Adapter 1: nat testhost: Adapter 2: hostonly ==> testhost: Forwarding ports... testhost: 22 (guest) => 2222 (host) (adapter 1) ==> testhost: Running 'pre-boot' VM customizations... ==> testhost: Booting VM... ==> testhost: Waiting for machine to boot. This may take a few minutes... testhost: SSH address: 127.0.0.1:2222 testhost: SSH username: vagrant testhost: SSH auth method: private key testhost: VirtualBox Version: 6.0 [...] ==> testhost: Setting hostname... ==> testhost: Configuring and enabling network interfaces... ==> testhost: Mounting shared folders... testhost: /keys => /Users/sourishkrout/dev/src/smallstep/code/src/github.com/smallstep/step-examples/ssh-example/keys testhost: /vagrant => /Users/sourishkrout/dev/src/smallstep/code/src/github.com/smallstep/step-examples/ssh-example ==> testhost: Running provisioner: shell... testhost: Running: inline script testhost: Add following line to your local hosts ~/.ssh/known_hosts file to accept host certs testhost: @cert-authority * ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJJM+jkIdieQvdPb8DwnfnJudEc9PgVBqLDWHKgvqoIiMXhuIyGstQ9ULOBMdJkqxMjkRTFZp1iFvIk+iU6hwTA= testhost: Add a /etc/hosts file entry testhost to resolve to 192.168.0.101 testhost: Check out README.md to learn how to grab user ssh certs to log into testhost
Go ahead and follow the instructions printed by Vagrant. This will enable your local SSH client to accept SSH host certificates (signed by the root SSH host private key). The following command will append the SSH host CA key (root SSH host public key corresponding to the root SSH host private key) to your local known_hosts file:
$ echo "@cert-authority * ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBJJM+jkIdieQvdPb8DwnfnJudEc9PgVBqLDWHKgvqoIiMXhuIyGstQ9ULOBMdJkqxMjkRTFZp1iFvIk+iU6hwTA=" >> ~/.ssh/known_hosts
You can also find the root SSH host CA key stored at step/certs/ssh_host_key.pub in this repo.
SSH certificates bind names to public keys. This SSH host certificate has the identity testhost which is why the following entry must be added to the local /etc/hosts file on the VM:
$ tail -n 1 /etc/hosts 192.168.0.101 testhost
Vagrant has already configured
sshd on testhost, the VM generated by Vagrant. Please note that for demo purposes the PKI is shared with the VM using a shared directory mount. Below you can see the relevant lines from the testhost VM's
$ tail -n 5 /etc/ssh/sshd_config # PermitTTY no # ForceCommand cvs server TrustedUserCAKeys /keys/ssh_user_key.pub HostKey /keys/ssh_host_ecdsa_key HostCertificate /keys/ssh_host_ecdsa_key-cert.pub
- TrustUserCAKeys: The root SSH user public key used to verify SSH user certificates.
- HostKey: The SSH private key specific to this host.
- HostCertificate: The SSH public certificate that uniquely identifies this host (signed by the root SSH host private key).
A valid user certificate is required to log into the testhost VM. Using
step, you can authenticate with your SSH-enabled CA and fetch a new SSH certificate.
In one terminal window, run the following command to startup your CA (password is
$ export STEPPATH=pwd/step $ step-ca step/config/ca.json Please enter the password to decrypt step/secrets/intermediate_ca_key: password Please enter the password to decrypt step/secrets/ssh_host_key: password Please enter the password to decrypt step/secrets/ssh_user_key: password 2019/09/11 22:59:01 Serving HTTPS on :443 ...
In another terminal window run:
$ export STEPPATH=pwd/step $ step ssh certificate testuser testuser_ecdsa --ca-url https://localhost --root step/certs/root_ca.crt ✔ Provisioner: admin (JWK) [kid: ux6AhkfzgclpI65xJeGHzNqHCmdCl0-nWO8YqF1mcn0] ✔ Please enter the password to decrypt the provisioner key: password ✔ CA: https://localhost Please enter the password to encrypt the private key: your-own-password ✔ Private Key: testuser_ecdsa ✔ Public Key: testuser_ecdsa.pub ✔ Certificate: testuser_ecdsa-cert.pub ✔ SSH Agent: yes
step-ca enforces authentication for all certificate requests and uses the
concept of provisioners to carry
out this enforcement. Provisioners are configured in step/config/ca.json.
Authenticating as one of the sanctioned provisioners indicates to
that you have the right to provision new SSH certificates.
In the above invocation of
step ssh certificate, you have authenticated your
request using a JWK provisioner which requires a password to decrypt a private
key. There are a handful of supported provisioners, each with their own
authentication methods. The OIDC provisioner is particularly interesting for
SSH user certificates because it enables Single Sign-On SSH.
step ssh certificate adds the new SSH user certificate to your local ssh
agent. The default lifetime of an SSH certificate from
step-ca is 16 hours. The
lifetime can be configured using command line options.
step ssh certificate -h in
step for documentation and examples).
$ ssh-add -l 256 SHA256:xt5VeMEG8uf+SBlddauylJHv9+Bl0E6H+46AV94+Its testuser (ECDSA-CERT) $ ssh testuser@testhost Welcome to Ubuntu 18.04.3 LTS (GNU/Linux 4.15.0-55-generic x86_64) [...]
As you can see the testhost VM will welcome you with a matching testuser@testhost prompt.
Learn how to use OAuth OIDC providers like G Suite or Instance Identity Documents to bootstrap SSH host and user certificates in the
This example repo includes a pre-generated SSH host certificate and key. To replace it, or generate SSH certificates for other hosts, run the following command:
step ssh certificate --host --principal testhost --principal testhost.internal testhost ssh_host_ecdsa_key
--principal identifies the hostname(s), ideally FQDNs, for the machine. For a single principal you can short cut the command to:
step ssh certificate --host testhost ssh_host_ecdsa_key
We recommend using your own PKI for usage outside of this example. You can
step-ca with both X509 and SSH certificate authorities using the
$ export STEPPATH=/tmp/mystep $ step ca init --ssh ✔ What would you like to name your new PKI? (e.g. Smallstep): Smallstep ✔ What DNS names or IP addresses would you like to add to your new CA? (e.g. ca.smallstep.com[,18.104.22.168,etc.]): localhost ✔ What address will your new CA listen at? (e.g. :443): :443 ✔ What would you like to name the first provisioner for your new CA? (e.g. email@example.com): admin ✔ What do you want your password to be? [leave empty and we will generate one]: Generating root certificate... all done! Generating intermediate certificate... Generating user and host SSH certificate signing keys... all done! ✔ Root certificate: /tmp/mystep/certs/root_ca.crt ✔ Root private key: /tmp/mystep/secrets/root_ca_key ✔ Root fingerprint: d601c93a6256080e42cf02087fdc737f1429226ada6c040bac6494332e01527e ✔ Intermediate certificate: /tmp/mystep/certs/intermediate_ca.crt ✔ Intermediate private key: /tmp/mystep/secrets/intermediate_ca_key ✔ SSH user root certificate: /tmp/mystep/certs/ssh_user_key.pub ✔ SSH user root private key: /tmp/mystep/secrets/ssh_user_key ✔ SSH host root certificate: /tmp/mystep/certs/ssh_host_key.pub ✔ SSH host root private key: /tmp/mystep/secrets/ssh_host_key ✔ Default configuration: /tmp/mystep/config/defaults.json ✔ Certificate Authority configuration: /tmp/mystep/config/ca.json\n Your PKI is ready to go. To generate certificates for individual services see 'step help ca'.
Now you can launch your instance of
step-ca with your own PKI like so:
$ step-ca $(step path)/config/ca.json Please enter the password to decrypt /tmp/mystep/secrets/intermediate_ca_key: Please enter the password to decrypt /tmp/mystep/secrets/ssh_host_key: Please enter the password to decrypt /tmp/mystep/secrets/ssh_user_key: 2019/09/11 23:34:13 Serving HTTPS on :443 ...
Please note that after you regenerate ssh_host_key.pub and ssh_user_key.pub, you will have to reconfigure
sshd for clients and hosts to accept the new CA keys. Check out this host bootstrapping script for configuration examples.